Mechanical Properties of Cross Chiral Honeycomb(CCH) structure for the Soft and Adjustable Wearable Suit using Auxetic Structure
DOI: 10.54647/materials43178 92 Downloads 160823 Views
Author(s)
Abstract
This paper is to present the design consideration of the adjustable flexible auxetic structure which is used in the soft wearable suit with the multi-layer materials. In order to design a macro-auxetic structure with the elastic flexibilities of the soft wearable suit, it is important to make the auxetic unit cell with the elastic adjustability. We make the tension experiments of several specimens, for verifying the mechanical structural characteristics of auxetic unit cell with flexure hinge mechanism. Through this approach, the valid geometric parameters of macro-auxetic structure used in the soft wearable suit can be designated.
Keywords
Cross Chiral Honeycomb(CCH), soft Wearable Suit, adjustable wearable suit, Auxetic structures,
Cite this paper
D. C. Lee,
Mechanical Properties of Cross Chiral Honeycomb(CCH) structure for the Soft and Adjustable Wearable Suit using Auxetic Structure
, SCIREA Journal of Materials.
Volume 7, Issue 1, February 2022 | PP. 21-31.
10.54647/materials43178
References
[ 1 ] | L. J. Gibson and M. F. Ashby, Cellular Solids:Structure and Properties (Cambridge:Cambridge University Press) |
[ 2 ] | A. Woesz, J. Stampfl and P. Fratzl, “Cellular solids beyond the apparent density-an experimental assessment of mechanical properties”, Adv. Eng. Mater., vol., 6, pp. 134-138, 2004 |
[ 3 ] | S. J. Li, Q. S. Xu, Z. Wang, W. T. Hou, Y. L. Hao, R. Yang and L. E. Murr, “Influence of cell shape on mechanical properties of Ti-6Al-4V meshes fabricated by electron beam melting method”, Acta. Biomater., vol. 10, pp. 4537-4547, 2014 |
[ 4 ] | M. F. Ashby, “The properties of foams and lattices”, Pil. Trans. R. Soc., vol. A-364, pp. 15-30, 2006 |
[ 5 ] | I.G. Masters, K.E. Evans, “Models for the elastic deformation of honeycombs.”, Compos. Struct., vol. 35, pp. 403–422, 1996 |
[ 6 ] | L. Yang, O. Harrysson, H. West and D. Cormier, “Modeling of uniaxial compression in a 3D periodic re-entrant lattice structure.”, J. Mater. Sci., vol. 48, pp. 1413–1422, 2013 |
[ 7 ] | Z. Lu, Q. Wang, X. Li, and Z. Yang, “Elastic properties of two novel auxetic 3D cellular structures.”, Inter. J. of Sol. and Str., vol. 124, pp. 46-56, 2017 |
[ 8 ] | K. E. Evans, “Design of doubly-curved sandwich panels with honeycomb cores.”, Camp. Stmct., vol. 17, pp. 95-111, 1990 |