ISSN: 2995-7141
Volume 9, Number 2 (2024)
Year Launched: 2016
Journal Menu
■ Archive
Previous Issues
SCIREA Journal of Electrical Engineering (ISSN: 2995-7141)
SCIREA Journal of Electrical Engineering is an international, scientific peer-reviewed open access journal published online by SCIREA.
Open Access free for readers, with article processing charges (APC)paid by authors or their institutions.
High visibility: Indexed in the Google Scholar and other databases.
Rapid publication: manuscripts are peer-reviewed and a first decision provided to authors approximately 20 days after submission; acceptance to publication is undertaken in 5 days.
Recognition of reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any SCIREA journal, in appreciation of the work done.
Archiving
Volume 9, Issue 2, April 2024
Abstract: This paper specifically focuses on the validity of generalized modal syllogism (i.e. A□MI-1) that contains the quantifier ‘most’. By making full use of generalized quantifier theory, modal logic and set theory, this paper derives 24 valid generalized modal syllogisms based on the validity of the syllogism A□MI-1. This metho
Volume 9, Issue 1, February 2024
Abstract: This paper firstly proves that the generalized syllogism HMO-3 is valid according to the relevant definitions, facts and rules, and then shows that at least the other 21 valid generalized syllogisms can be deduced from the syllogism HMO-3 with the common generalized quantifiers ‘most’ and ‘at most half of the’. The main con
Abstract: Electricity is indispensable worldwide, but conventional distribution networks struggle in sparsely populated areas. Capacitor Coupled Substations (CCS) and Controllable Network Transformers (CNT) are promising solutions for supplying electricity to such regions. CCS efficiently delivers power to remote areas, while CNT ena
Abstract: This paper investigates the formulation of a State Space Model for a Capacitor Coupled Substation to facilitate power tapping and injection into an electrical transmission network. The primary objective is to establish a state space representation of the electrical system that can be used to simplify the modeling of complex
Volume 8, Issue 2, April 2023
Abstract: The concept of metric space and topological space grew out of the study of real line and Euclidean space and study of continuous function on these spaces. In this Paper, we will try to discuss some concepts in metric spaces and topological spaces whose meanings are same but presented by the different ways. We will discuss o
Volume 8, Issue 1, February 2023
Abstract: This article discusses membrane desalination methods that use membrane processes (ion exchange membranes, electrodialysis). A brief summary of the technology of water desalination on the electrodialysis apparatus as part of a combined scheme is given followed by a reduction in the maximum salinity of the resulting solution
Abstract: As technology became more advanced, a lot of products have included electric circuits in order to increase their capabilities. The demand for circuit boards rises naturally alongside with the demand for these products said above. Many manufacturers have started to incorporate automation systems into their production lines,
Volume 7, Issue 3, June 2022
Abstract: The syntheses and characterisation of Rare-Earth-Metals (REMs) heteroaromatic complexes, via the use of green organic esters such as Pyridinecarboxylate (Pyc) or heteroaromatic organic to form stable compounds ie. Lanthanide-Pyridinecarboxylate (Ln-Pyc), has been demonstrated to be one of the preferred compounds to form a g
Volume 7, Issue 2, April 2022
Abstract: To help scholars in computer engineering get to know the state-of-the-art topics and choose suitable journals to publish their work, the method that uses structural topic model (STM) to extract the topics of papers and uses the generalized linear model to analyze the influence of time on topic prevalence. Based on these res
Volume 7, Issue 1, February 2022
Abstract: In our daily lives, embedded and Internet of Things (IoT) applications are becoming extremely important. It advised using intellectual property (IP) while developing embedded and IoT applications. Hardware security and electronic component counterfeiting pose a threat to IoT devices and IPs. Another consideration is that to
Volume 6, Issue 4, August 2021
Abstract: The propagation of short picosecond pulses in coupled strip lines with a phase velocity ratio of odd and even modes of 3:1 is considered. The feature of the separation of the input pulse between the three output ports without significant loss of energy due to reflection from the input in transdirectional couplers based on c
Volume 6, Issue 3, June 2021
Abstract: A microgrid is a new concept that has changed the power systems dramatically. This paper focuses on the autonomous operation of an Islanded inverter. The manuscript deals with the design of micro grid in island mode. There are several methods to control a microgrid. Among them droop control deals with change of active and r
Volume 6, Issue 2, April 2021
Abstract: An interactive system based on computer vision technology for food and agricultural education is proposed, on which knowledge of food cuisines can be learned by game playing using object-based tangible interfaces. Specifically, cuisines with their ingredients are projected onto an interactive projection table for the user t
Volume 6, Issue 1, February 2021
Abstract: The main characteristic of autonomous power systems of radio repeaters is the duration of uninterrupted operation without maintenance. In existing schemes, autonomy is ensured by the use of solar panels, wind generators and batteries or diesel-generators. However, both batteries and diesel-generators in real practice suffer
Abstract: With the increasing of UHVDC transmission project in China, the design, operation management and equipment manufacturing of HVDC projects in China are also at the leading level in the world. However, the condition monitoring technology of converter station equipment in our country is developing slowly. Based on IEC61850 int
Abstract: The sorption of Pb (II) ions from an aqueous solution of lead nitrate on carbon sorbents, obtained from waste based on cellulose-containing materials, was studied. Particularly, among studied carbons (hazel nutshell, walnut shell, sawdust, activated carbon (fraction size - mainly 40 microns) material obtained from walnut s
Volume 5, Issue 6, December 2020
Abstract: AbstractThe possibility of orienting very large ultra-light balloon-like MW antennas, orbiting in the Earth magnetic field, through electric currents flowing in Cu wires embedded in the antennas walls, are examined. It is shown that such currents may easily provide the needed forces without the necessity of mechanicall
Abstract: Over the last few years, extended recursive and kernelized algorithms were one of the most promising in terms of tracking signals of state-space models in non-stationary environments. In this work, we intend to propose an EX-RLS (Extended Recursive Least Squares) algorithm based on a non-linear sum function of the error. Th
Abstract: Chromium (III) iodide (CrI3) is a layered 2-D semiconducting magnet in which strong ferromagnetic order is present within individual layers with possibly weak magnetic coupling between them. In this report we study the specific heat of this interesting compound as functions of both temperature and magnetic field. The layere
Volume 5, Issue 5, October 2020
Abstract: Merchant ships vary considerably in size, type, general design and function. Some specific type of ships (Ro-Ro passenger/vehicle/train ferries) requires much more stringent regulations for construction, maintenance and safety than those for other. By law, a vessel in all loading conditions must satisfy damage stability req
Abstract: This paper proposes a new approach for TCP congestion control for future data networks, which is called TCP DCM+. DCM is the previous version, which uses TCP Westwood method of estimating the available bandwidth. The aim of the new protocol is to improve the performance and stability of DCM through using the corrected algo
Volume 5, Issue 4, August 2020
Abstract: Speaker identification is the key area of digital signal processing where the synthesis and noise reduction of speech are the core research areas. Speaker identification system is influenced by the background noise which directly affects the efficiency of system and is still reflected as a challenging question in speaker id
Volume 5, Issue 3, June 2020
Abstract: The ability to instantly and successfully interact among technical engineers, management team and machines is vital to the productivity and efficiency of manufacturing shopfloor. Chat messenger with smart mobile has obvious advantages for shopfloor management in group communication, instant notification and remote control.
Abstract: Performance, Reliability, Free Riders, Peer to Peer System
Volume 5, Issue 2, April 2020
Abstract: Human hair colorization, concerning given model hair image without changing neither hairstyle nor hair texture, is a challenging task. The principle problem making this task complicated is the difference in the texture and the illumination between a user and model images. The natural human hair consists of a mix of hair swa
Abstract: In view of the accuracy of strapdown inertial navigation system to the turntable, the difficulty of installation leveling and North alignment, as well as the various factors such as temperature rise, temperature change of hardware circuit board and components for a long time, the IMU is proposed to take the reference north
Volume 5, Issue 1, February 2020
Abstract: In the last couple of decades, wire-driven mechanisms getting more attention in robotics and medical instruments. The wire-driven actuation system is one of the effective ways of force transmission in the distance. In continuum robots, a wire-driven mechanism plays a crucial role in robot control. Likewise, power transmissi
Volume 4, Issue 4, August 2019
Abstract: The Internet of things is perceived today as a key opportunity for commercial development in different sectors of activity that can be deployed in the local level as in the case of smart homes, at the regional level as in the case of health, or at the national level in the energy management sector. The IOT connectivity serv
Volume 4, Issue 3, June 2019
Abstract: The energy issues related to the quality of the distribution of electrical energy require the development of active filtering devices of electrical networks. By injecting a current in phase opposition with the harmonics of the load (disruptive currents), the active power filter makes it possible to improve the quality of th
Abstract: In this paper leaky wave cable with adjacent antenna elements operated on 3.5 GHz were evaluated by measurement of indoor installed setups. Novel radiation cable arrangements were compared with conventional LCX cable and hot spot antenna references. The power distribution in a 34 m long office environment was measured using
Volume 4, Issue 2, April 2019
Abstract: Increasing complexity of power system, there so many disturbances occur in the system. That disturbance created power quality issue in the system. This power quality problem increases power losses, so the power requirement of consumers is not fulfilled.This issues are compensated by using some custom power devices like DVR,
Abstract: This study applies the anharmonic correlated Einstein model to the spectra of extended x-ray absorption fine structure (EXAFS) to study how pressure and temperature affect the cumulants and thermodynamic parameters of copper, silver, and their alloys. The parameters for the effective interatomic potential are derived by usi
Volume 4, Issue 1, February 2019
Abstract: Normally the Cûk converter is used as DC/DC converter that has two types of output voltages in magnitude that is; the output is either greater than or less than the input voltage magnitude. The basic construction of a Cûk converter is essentially a boost converter followed by a buck converter coupled by a capacitor. Unlike
Abstract: In powerline communication, both the RF data and low frequency electric power flow through the same line. Where the power-line is actually designed for the transmission and distribution of electrical power. Therefore, the cables/wires are so chosen as suitable for the use of high voltages at low frequencies. But RF transmis
Volume 3, Issue 1, February 2018
Abstract: In this paper, the concept of practical stabilization for nonlinear systems is introduced and the practical stabilization of uncertain Duffing-Holmes control systems with unknown actuator nonlinearity is explored. Based on the time-domain approach with differential inequalities, a single control is presented such that the p
Volume 2, Issue 1, February 2017
Abstract: Optimization techniques are becoming more popular for the improvement in control of induction motor. Many intelligent algorithms have been used to improve performance of induction motor, Cuckoo search algorithm as an optimization algorithm can be used to find the optimal parameters of PID controller for induction motor. In
Volume 1, Issue 2, December 2016
Abstract: In this article, the parameters required for an acoustic waveguide (concentrator) to produce acoustic cavitation effects in an ultrasonicator are derived. The derivation is based on the solutions to complex valued wave equations. Based on the derived equations, the length of the concentrator required to produce acoustic cav
Volume 1, Issue 1, October 2016
Abstract: The paper presents a method to measure the parameters of four circuits AC lines on the same tower. At first, the positive sequence open circuit impedance and short circuit impedance are both measured for any one of four lines. Secondly, four cases of 2-phase systems are assembled by four lines on the same tower, and then th
Abstract: this paper proposes a new technique for estimating the fundamental frequency of power system in harmonic condition by using real-time wavelet transform. Indeed, the fundamental component of the distorted system voltage is extracted using real-time wavelet transform and then the frequency of the fundamental component can be
Abstract: The DC magnetic bias can affect the normal production and operation of the transformer. In this paper, by means of the finite element simulation software to simulate the excitation current fluctuations phenomenon of the three-phase transformer after adding DC magnetic bias, and by comparing the excitation current fluctuatio